Part Number: 116A

4 axis CNC Machined Aluminium Cylinder Side Covers. (Set of 4). Chamfered outer face (not flat) that blends with original lines of outer cylinder face. Fits in seconds,
gives a better look to the Cylinder sides!
© Exactrep

Available in Unpainted only.

Please see click on for picture on the bike.

Part Number: 139 E

Available in:
A) Plain Aluminium: £100.73 ($130.95) -- £120.87 Including VAT at 20%
B) Aluminium & High Temperature Black Painted: £105.83 ($137.58) -- £126.99 Including VAT at 20%

Please see click on for picture on the bike.

Special Order Item

Part Number: 156

Totally boost the look of your Bike! with these aluminium CNC machined set of 4 pieces.
Complete with necessary screws (8 x) to fit in seconds. Original Length is 32mm - 1 1/4" , Short Length is 16mm - 5/8".
Note: Not supplied with mesh etc..
A) 4 x Original Length
B) 4 x Short Length
C) 2 x Original Length + 2 x Short Length

Can be used with Standard Air Scoops, or our 'Mega Air-Scoops'.

© Exactrep 2005

Part Number: 182 E

Stove Enamelled Gloss black (better than powder coat).
1FK-15411

We have 4 x covers in-stock.

Genuine Yamaha Infill and rubber available separately, please email or phone to enquire

Part Number: 157

Stove Enamelled Gloss black (better than powder coat).
1FK-15421

We have 5 x covers in-stock

Genuine Yamaha insert parts available separately at £40.00 + VAT, please email or phone to enquire.

Part Number: 53 E

OTEC set of 7 Clear CNC Billet Engine Covers, set consists of:

1 x Clear Genny Cover
1 x Clear Clutch Cover
1 x Clear Mid Gear Cover
1 x Clear Waterpump Cover
2 x Clear Cam Covers
1 x Oil Sump Cover / Oil Pan


Special Order Item

Part Number: 199 E

OTEC set of 6 Clear CNC Billet Engine Covers, set consists of:

1 x Clear Genny Cover
1 x Clear Clutch Cover
1 x Clear Mid Gear Cover
1 x Clear Waterpump Cover
2 x Clear Cam Covers


Special Order Item

Part Number: 274 E

OTEC set of 4 Clear CNC Billet Engine Covers, set consists of:

1 x Clear Genny Cover
1 x Clear Clutch Cover
1 x Clear Mid Gear Cover
1 x Clear Waterpump Cover

Special Order Item

Part Number: 68 E

OTEC set of 7 Clear CNC Billet Engine Covers, set consists of:

1 x Clear Genny Cover
1 x Clear Clutch Cover
1 x Clear Mid Gear Cover
1 x Clear Waterpump Cover
2 x Clear Cam Covers
1 x Oil Sump Cover / Oil Pan


Special Order Item

Part Number: 105 E

OTEC set of 6 Clear CNC Billet Engine Covers, set consists of:

1 x Clear Genny Cover
1 x Clear Clutch Cover
1 x Clear Mid Gear Cover
1 x Clear Waterpump Cover
2 x Clear Cam Covers


Special Order Item

Part Number: 112 E

OTEC set of 4 Clear CNC Billet Engine Covers, set consists of:

1 x Clear Genny Cover
1 x Clear Clutch Cover
1 x Clear Mid Gear Cover
1 x Clear Waterpump Cover

Special Order Item

Part Number: 196

Made from CNC Machined Billet Aluminium

Special Order Item

Part Number: 143 E

Made from CNC Machined Billet Aluminium

Special Order Item

Part Number: 192

Made from CNC Machined Billet Aluminium, pictured with the OTEC Lock-up clutch installed. (this part is not included, please see #197E)


Special Order Item

Part Number: 152 E

Made from CNC Machined Billet Aluminium

Special Order Item

Part Number: 197 E

OTEC Lock-Up Clutch.
This kit replaces your clutch boss and outer pressure plate.
You use all oem friction plates and stock spring.
Fits with original outer casing.

Lock-up Clutch can be ordered either 'New' (using New Genuine Yamaha parts) or 'Exchange' (Using your parts, these will be modified)

New: £580.13 ($754.17) -- £696.15 Including VAT at 20%
Exchange: £299.63 ($389.52) -- £359.55 Including VAT at 20% (note: you need to send to us: 1 x clutch centre hub/boss + 1 x outer pressure plate)


Special Order Item

Part Number: 195

Made from CNC Machined Billet Aluminium

Special Order Item

Part Number: 161 E

Made from CNC Machined Billet Aluminium


Special Order Item

Part Number: 194

Made from CNC Machined Billet Aluminium

Special Order Item

Part Number: 155 E

Made from CNC Machined Billet Aluminium

Special Order Item

Part Number: 191 E

Made from CNC Machined Billet Aluminium, includes 16 x new bolts.

Available in:

A) Aluminium: £663.00 ($861.90) -- £795.60 Including VAT at 20%
B) Black: £860.57 ($1,118.74) -- £1,032.69 Including VAT at 20%
C) Bi-Colour: £962.63 ($1,251.42) -- £1,155.15 Including VAT at 20%

Special Order Item

Part Number: 238 E

Replacment outside 8 x screws (viewable) for the cam covers, fit as original.

(note: if require all 16 x screws, please order 2 x of these.)

Special Order Item

Part Number: 181 E

OTEC CNC Machined Billet Aluminium 'deep pan' ( approx 1 litre extra Oil capacity) Sump Cover.

Available in:
A) Aluminuim: £498.53 ($648.09) -- £598.23 Including VAT at 20%
B) High Temperature Black Painted: £541.88 ($704.44) -- £650.25 Including VAT at 20%

Special Order Item

Part Number: 132 E

'V4' Carburettor Inlet Covers, CNC Machined in Aluminium supplied with all necessary stainless screws and spacers.
Fits in seconds.

Available in:
A) Aluminium: £94.35 ($122.66) -- £113.22 Including VAT at 20%
B) Bi-colour: £105.83 ($137.60) -- £126.99 Including VAT at 20%

Special Order Item

Part Number: 209 E

Made from Billet Aluminium with a High Temperature Black Painted 'V-Max' engraved plate.

Please see 'click-on' for pictures on the bike.

Special Order Item

Part Number: 2 E

Replacement clear topped CNC Machined Aluminium diaphragm covers (set of 4)

Available in:
A) Aluminium: £223.13 ($290.07) -- £267.75 Including VAT at 20%
B) High Temperature Black Painted: £265.20 ($344.76) -- £318.24 Including VAT at 20%
C) Bi-colour: £251.18 ($326.53) -- £301.41 Including VAT at 20%
*Note: Bi-colour = Black base & aluminium stack.

Special Order Item

Part Number: 207 E

CNC Billet Aluminium Carburettor Covers, Complete Set of 4.

Available in:
A) Aluminium: £223.13 ($290.07) -- £267.75 Including VAT at 20 %
B) High Temperature Black Painted: £252.45 ($328.19) -- £302.94 Including VAT at 20%

Special Order Item

Part Number: 272E

Direct replacement for original, in CNC Machined aluminium, supplied with 'O' rings.

A) Aluminium: £89.25 ($116.03) -- £107.10 Including VAT at 20%
B) Black Anodised: £96.90 ($125.97) -- £116.28 Including VAT at 20%

Special Order Item

Part Number: 271 H

Fits as original rear drive unit.

It's very technicial work to remove the gears out of the stock case and to adjust the gears clearence in these units. This work requires good mechanical competence and special tools.

For customers who want to send us their complete stock hub we can do the installation work and send back the new case ready to fit on the bike (+ return your old standard outer case)

Installation Charge £189.50 ($246.35) -- £227.40 Including VAT at 20% + Extra carriage £40.00 ($50.00) -- £48.00 Including VAT at 20%

Available in :
A) Aluminium Windowed Rear Drive Unit Only: £1,045.50 ($1,359.15) -- £1,254.60 Including VAT at 20%
B) Aluminium Windowed Rear Drive Unit + Installation + Extra Carriage: £1,275.00 ($1,657.50) -- £1,530.00 Including VAT at 20%


Special Order Item

Part Number: 429E

Available in:
A) Aluminium £16.20 ($21.06) -- £19.44 Including VAT at 20%
B) High Temperature Black Painted: £19.13 ($24.87) -- £22.95 Including VAT at 20%

Special Order Item

Part Number: 193

Helps the engine breathe better taking the strain off the original breather box and stops oil being forced up to the airbox. (then 'seeping' over the carbs).
Includes screw in oil filler nozzle, stainless braided hose (colour may vary to shown), red 'K&N' breather filter, and 2 x hose finishers.
Now comes with choice of Black, Red or Blue finishers.
Fits all models '85-'07

Part Number: 107E

Threads into oil filler hole

Part Number: 97A

C.N.C. Machined Aluminium. © 2002 Exactrep
(Note:- Supplied plain / unpainted, i.e: black area surrounding logo recessed by 2mm)

Part Number: 97B

C.N.C. Machined Aluminium. © 2002 Exactrep
(Note:- Supplied plain / unpainted, i.e: black area surrounding logo recessed by 2mm)

Part Number: 216

Fits to original bolt holes, covers space left by rear Brake master cylinder on right hand side (if using Rearsets part no 146, note: 'Yamaha' or 'Tuning fork' pieces not supplied) + wires on left hand side behind mid gear cover.© Exactrep
Available in Polished / Mirror finish stainless steel.

Rearsets:
Polished / Mirror finish stainless steel. £71.40 ($92.82) -- £85.68 Including VAT at 20%
Black powder coated: £61.20 ($79.56) -- £73.44 Including VAT at 20%

Standard Footpegs:
Polished / Mirror finish stainless steel. £76.50 ($99.45) -- £91.80 Including VAT at 20%
Black Powder coated: £66.30 ($89.19) -- £79.56 Including VAT at 20%

Part Number: 201E

This is a 6 piece direct replacement silicone race specification coolant hose kit (as the 7th hose (filler neck to header bottle) is unseen). Great quality with ultra high burst rating and better heat dispersal make these an essential upgrade for any bike. Also great for custom show use.

Available in Blue, Yellow, Black, Orange, Green, Red, Dark Purple all Gloss finish.

Part Number: 49

Made from CNC Machined Billet Aluminium
1997-2007 Spin-on filter only.

Special Order Item

Part Number: 71

OUT OF STOCK

Made from CNC Machined Billet Aluminium
1985 -> 1996 for Cartridge type only (ie: not for spin on type!)
Fits as Original.

Available:
Oil Filter bowl/cover only: £140.25 ($182.33) -- £168.30 Including VAT at 20%
Oil Filter bowl with new stainless steel 19mm spanner bolt: £210.38 ($273.49) -- £252.45 Including VAT at 20%
Note: You must install the ball, spring and pin from the original bolt to the new bolt.


Note: Original Yamaha Part (now discontinued)

Part Number: 94

Part Number: 93

Stainless steel cap head screws x 16.